All solid
state infrared laser is made features of ultra compact, long lifetime,
low cost and easy operating, which is used in scientific experiment,
optical instrument, optical sensor, measurement, communication, spectrum
analysis, etc
Wavelength (nm) |
1342�1 |
Output power (mW) |
>1500, 1600, 1700, � , 2000 |
Transverse mode |
Near TEM00 |
Operating mode |
CW
|
Power stability (rms, over 4 hours) |
<1%, <3%, <5% |
Warm-up time (minutes) |
<10
|
M2
factor |
<2.
0 |
Beam divergence, full angle (mrad) |
<2.
0 |
Beam diameter at the aperture (mm) |
~3.
0 |
Beam height from base plate (mm) |
29
|
Polarization ratio |
>100:1 |
Pointing stability after warm-up (mrad) |
<0.05 |
Operating temperature (℃)
|
10~35 |
Power supply (90-264VAC) |
ST-H-LED |
ST-H-FDA |
ST-H-OEM |
TTL
modulation/ Analog modulation |
Optional, 2kHz or higher (others on request, up to 30kHz)
|
Expected lifetime (hours) |
10000 |
Warranty period |
1
year |
Remark:
Power supply model ST-H-LED has a display screen on the power supply and
you can adjust the output power of the laser via adjusting the knob on
the power supply. As to the ST-H-FDA and ST-H-OEM which do not have the
function.
|