ETH Series Ethernet Marking Cards and Software

List of Products

ETH Series Ethernet Marking Cards and Software

Products

ps/fs lasers

DPSS 1064/532/355 lasers

CO2 lasers

Diode lasers

Laser marking heads

Laser marking machines

Fiber laser cutting machines

Usually a PCI slot card is used in marking control system with a PC or industrial computer. ETH6608 card, which is a standalone model with Ethernet communication port to PC, allows the capability of more devices configuration, and is more compatible solution in laser marking or engraving applications.

Features:

1. Data transfer speed: 100Mb/s

2. Hardware delay, min 0.1us

3. All instructions in the buffer processes in sequence, including delay instruction, in 0.1us.

4. DAC output of 16bits: 4 (output voltage range: ±10V, ±5V or 0~10V)

5. Digital input (DIN): 16

6. Digital output (DOUT): 20 (any one can be PWM output with frequency and pulse number assigned)

7. DIN hardware limit: 6

Applications:

1. Industrial control

2. Automation

3. Measurement device

4. Laser device

Technical specifications:

Digital input
Input no	16, TTL compatible
Low voltage	Max 0.8V
High voltage	2.4-5.3V
Input low limit	+0.5V @ -0.2mA max
Input high limit	+2.5V @ +20uA max
Digital output
Digital output no	20
Low voltage	0-0.4V
High voltage	2.7-5.1V
Output high limit	Max. +0.5V at 8.0mA (Sink)
Output low limit	Min. 2.7V at 0.4mA (Source)
Analogue output
Output no	4, single-ended
Resolution	16bits
Convert time	5us
Output range	±10V
Output current	5mA
Accuracy	±2 LSB (MAX)
Common specifications
Power consumption	DC 5V, 1.5A
Operating temperature	0° C ~ 50° C
Storage temperature	-20° C ~ 80° C
Humidity	5 ~ 85%, non condensing
Dimension	130 x 110 x 40 mm