SMT Drivers

The Surface Mount Technology (SMT) design and packaging of our MicroMax drivers yield high performance operation in extremely compact packages and very attractive OEM prices. Integral mounting hardware, convenient placement of system tuning and setup adjustments and overall servo size further support compact system designs and ease of integration. Optional bandwidth enhancement modules extend system bandwidth and positioning speeds to new levels. The MicroMax series offers two available models.

The MicroMax 670XX Driver Board

Our advanced servo topology and Class 1 error integration provides excellent positioning repeatability, accuracy and stability in a compact single axis configuration. High stability components provide excellent time and temperature stability. Built-in system conditioning and status monitoring ensures complete and reliable system control during integration and operation.

The MicroMax 677XX Driver Board

It  provides an extremely compact, high performance and fully featured servo package at a very attractive price. At just 2 inches in width and 2.5 in length it is among the smallest servo drivers commercially available, bringing easier integration to your scanning solution. Featuring automatic gain control (AGC), low noise system damping, linearity compensation and high stability components, the 677XX servo provides high quality and stable positioning.

The MicroMax 678XX Driver Board

Our advanced Class 0 non-integrating servo topology provides the highest positioning speed and lowest cost in a compact single axis configuration. Differential analog inputs, flexible power supply configurations and positioning control allow for optimization of system positioning angle, speed, accuracy and cost. Servo signal conditioning, and continuous power monitoring and adjustment maintain controlled performance within the rated angular excursion limits.

Original Servo Drivers

For existing and specific OEM and system applications, the model 650XX Integrating and 658XX Non-integrating servos based on our proven Class 1 and Class 0 servo architectures offer excellent positioning performance. These servo capabilities are also offered in the model 653XX dual axis servo board.

Rack Mount Drivers

Rack Mount Driver Boxes are also available for those applications requiring proven Class 1 and Class 0 servo driver capability and/or the highest peak galvo drive capability in a fully integrated and packaged servo control unit. Only a structured command input signal and AC power are required. The Rack Mount Drivers are available in both the model 602XX single axis and the model 603XX dual axis configurations.

The MicroMax 678XX Single Axis

Our advanced Class 0 non-integrating servo topology provides the highest positioning speed and lowest cost in a compact single axis configuration. Differential analogue inputs, flexible power supply configurations and positioning control allow for optimization of system positioning angle, speed, accuracy and cost. Servo signal conditioning, and continuous power monitoring and adjustment maintain controlled performance within the rated angular excursion limits.

The MicroMax^� Model 673XX Dual Axis

The MicroMax� Model 673XX Dual Axis Driver Board: our dual axis servo offers integrating or non-integrating servo loop configurations, error and/or slew rate input signal conditioning and high stability components for extremely accurate positioning in applications that demand the best repeatability, linearity, stability and cost in a very compact system. Low profile connectors and the dual axis design of the 673XX allow for ease of integration in any system, while built-in system conditioning and status monitoring ensures complete and reliable system control.

Servo Driver MicroMax^� 671XX Single Axis

The MicroMax^� 671XX Driver Board: our advanced servo topology and the availability of Class 1 error integration provides excellent positioning repeatability, accuracy and stability in a compact single axis configuration. High stability components provide excellent time and temperature stability. Built-in system conditioning and status monitoring ensures complete and reliable system control during integration and operation.

We offer a digital input option with the 671 and 670 servo drivers. The Model 6757 Parallel Digital Interface is a module that mounts onto the MicroMax Servo Controller. This allows the user to provide a 16 BIT parallel digital position command. There are also four control lines allowing the user to address and control each input module using one 16 BIT data bus. The servo driver easily be configured to switch between digital and analog position command control. Each module is supplied with a mating single ended cable. One module is needed for each scanner. This is optional and is only required if a digital command is being used. This option can be easily added at a later date.

The DC 900 Self-Tuning Digital Servo Driver

The Next Generation in galvanometer DSP servo control, the DC900 Digital servo utilizes state space algorithms to provide speed far beyond that an analog PID servo. The DC900 uses model based predictive reasoning to provide real-time optimization for all galvo motion, reducing step times and tracking delays for  allowing an increase in speed of 3 to 4 times that achieved with a PID servo for laser marking applications. Other cost reducing features include self tuning and startup calibration with no computer required, and remote access/support capability. The DC900's flexible power supply configuration capabilities make it the ideal choice for laser marking and other applications where speed and precision are required.

The DC 2000 Dual-Axis, Self-Tuning Digital Servo Driver

The Next Generation in galvanometer DSP servo control, the DC2000 Dual-Axis Digital servo utilizes state space algorithms to provide speed far beyond that an analog PID servo. The DC2000 uses model based predictive reasoning to provide real-time optimization for all galvo motion, reducing step times and tracking delays for  allowing an increase in speed of 3 to 4 times that achieved with a PID servo for laser marking applications. Other cost reducing features include self tuning and startup calibration with no computer required, and remote access/support capability. The DC2000's flexible power supply configuration capabilities make it the ideal choice for laser marking and other applications where speed and precision are required.

The DC servos can be used with the 6200H family of galvos. The DC900 will work with all the 6200 family and the DC2000 will work with all except for the 6200 & 6210. Also, the DC2000 will only accept XY2-100 or DAC input while the DC900 will accept Analog, XY2-100 and DAC.